TIME: 2020-07-25
Under normal circumstances, a steel pipe straightening machine can adjust a bent steel pipe to ≤ 3 °, but after actual operation, it was found that the straightening effect of the steel pipe is not as ideal.
This is either a problem with the straightening machine or an error in the straightening process. What should be done?
In fact, the steel pipe straightening machine has requirements for straightening steel pipes, especially in terms of diameter. If the steel pipe is lower than the corresponding specifications, the straightening effect will be poor or it will be impossible to straighten at all. But what if the diameter of the steel pipe meets the requirements and still cannot achieve the desired effect?
What factors are related to the unsatisfactory performance of the steel pipe straightening machine?
In this case, you can loosen the adjustment screw of the roller, place the steel pipe into the steel pipe straightening machine, and tighten the adjustment screw one by one from the back to the front, so that the roller just presses against the steel pipe. Never press too tightly, otherwise it may damage the steel pipe.
Also, there may be some deviation in the diameter of the steel pipe. If there is a problem of poor performance when using the steel pipe straightening machine, it is necessary to adjust the steel pipe straightening machine in the above way to improve its straightening effect.
In addition to steel pipes, steel pipe straightening machines can also handle steel reinforcement materials, but it is important to pay attention to safety during operation to prevent accidents from occurring. For example, before starting the machine, there are some preparations that need to be done. The cutting blade should be checked and confirmed to have no cracks, the tool holder bolts should be tightened, and the protective cover should be secure.
Secondly, after the inspection is completed, when starting the straightening machine, it is necessary to let it run idle first, and check that all transmission parts and bearings are running normally before officially starting the operation. If the steel pipe straightening machine does not reach the normal speed, it is not allowed to operate.
High-end pipe manufacturing equipment
manufacturing experience
professional team
Plant a total area of 10,000
square meters
9 inventions, 11 utility models <bR />2 appearance designs
2016-2019 © Huajin Heavy Equipment All Rights Reserved Xiang ICP Preparation 12002607 Number
