Steel pipe straightening machine is a maintenance machinery for steel pipe scaffolding, mainly used for straightening and repairing some bent and deformed steel pipes.
1. Characteristics and Scope of Use
The design structure of the steel pipe straightening machine is reasonable, it can quickly adjust for rust removal, and the operation method is simple, with high safety and reliability. Mainly suitable for straightening, rust removal, and painting of scaffolding steel pipes, in order to achieve the goal of steel pipe recycling.
2. Straightening steps:
(1) Clean the attachments on the steel pipe first.
(2) Then start the steel pipe straightening machine.
(3) Place the bent steel pipe elbow upwards or downwards into the machine for straightening.
(4) Pull the handle to keep the eccentric angle fixed, then rotate the handwheel to press it down to the straightening position.
3. Working principle
Its working principle is that the motor drives the reducer to reduce speed, then drives the upper and lower steel wheels, and then drives other steel wheels to rotate through chain connections.
4. Maintenance methods
(1) The input and output wheels of the steel pipe straightening machine should be kept clean and regularly cleaned.
(2) The bearing part of the steel pipe straightening machine should be cleaned once a month and butter should be added in a timely manner.
(3) The triangular belt on the motor should be properly tightened, and if it becomes loose, it should be replaced in a timely manner.
(4) Keep the chain clean, and then regularly clean and inspect the chain.
(5) Timely check if there is any looseness in the screw area. If there is looseness, tighten it before starting the steel pipe straightening machine.
The above is an introduction to the steel pipe straightening machine. Have you understood the content shared by the editor? I hope everyone can have a better understanding of this product.
