As a maintenance and protection machinery for building steel pipe scaffolding, the steel pipe straightening machine is mainly used to straighten and repair scaffolding steel pipes and other pipes that have been bent or deformed during construction. The surface of the straightened steel pipe has no indentation or shrinkage phenomenon, which is excellent
The standards formulated by the Ministry of Construction.
Three major functions of steel pipe straightening machine:
(1) Straightening: The steel pipe straightening, rust removal, and painting integrated machine adopts the principle of three points and one line rolling straightening, with a dial and angle dial design. The design ensures the straightening effect without damaging the steel pipe.
(2) Double rust removal: "Centrifugal design" removes rust on the surface of steel pipes by automatically shrinking the steel wire brush through the design of counterweights. "Centrifugal" rust removal can automatically adjust the steel wire brush, which will not damage the steel pipe as severely as the dead brush
Steel pipes often cannot be used after being brushed several times because they cannot adjust the contact distance between the steel wire brush and the surface of the steel pipe in a timely manner. Friction is often high, which can cause a large area of thin steel pipes to be brushed, resulting in a large number of steel pipes being scrapped and unusable. Dead brushed steel pipes are often brushed over
The back will be very shiny and the surface will be very smooth. While painting (spray painting), the paint is not easy to adhere to the steel pipe, making it easy for large pieces to fall off.
”Centrifugal rust removal can change the distance between the steel wire rope and the steel pipe through the design of counterweights
At the same time, it also protects the steel pipe from being damaged by the steel wire rope. Painting is also very easy and firm. The design of the ash bin greatly improves the operating environment for operators. Simply tying the ash bin with a bag can prevent large amounts of dust from escaping during ash removal
In the air.
(3) Painting: There are two types: brushing paint and spraying paint. Painting is done by rotating the brush to paint the steel pipe, and painting is done by extracting the paint through a spray pump and spraying it onto the steel pipe. The rust remover is suitable for Yifa multifunctional steel pipe straightening machine, which is mainly suitable for 48mm
Scaffolding steel.
