Steel pipe straightening machine is a maintenance machinery used for building steel pipe scaffolding steel pipes, mainly used to straighten scaffolding steel pipes and other pipes that undergo bending deformation during construction. After straightening, there are no indentations or shrinkage on the surface of the steel pipe
It is a standard formulated by the Ministry of Construction. At the same time, the device also has the function of removing dust and rust on the surface of the steel pipe, as well as painting. It solves the problem of long-term corrosion of steel pipes, thinning of pipe walls, and easy bending during construction, disassembly, and transportation, which cannot cause
Causing safety issues during the installation of scaffolding steel pipes.
There are many ways to use a steel pipe straightening machine on the internet, all of which are based on the correct method. Based on years of experience in producing steel pipe straightening machines, Huajin Heavy Industry has summarized a set of correct methods for using steel pipe straightening machines, mainly including the following
Point:
The adjustable diameter of a regular machine is 48-51 millimeters. Steel pipes larger than this range cannot be straightened using this machine to avoid damaging the machine. Steel pipes within this range cannot achieve the desired effect during straightening, so they are not recommended for use.
Before straightening, roughly inspect the steel pipe, including whether it is welded, severely deformed or flattened. This type of steel pipe requires manual processing to be straightened with this machine.
When the steel pipe is fed, it should be leveled by hand. When the steel pipe automatically moves forward, release your hand and stay away from both sides of the steel pipe. When the steel pipe comes out, it should move forward synchronously with the steel pipe. If the adjustment cannot meet the requirements, the top can be adjusted appropriately
Screw.
4. If the steel pipe suddenly does not rotate or does not move forward, immediately press the stop button, and then press the reverse button to exit the steel pipe. After cutting off the power, check for faults and troubleshoot before continuing to use.
5. After use, clean the paint box to prevent the paint from drying out and affecting the effectiveness of use.
